All Categories
-
Voltage Detection Sensor Module (0-25V)
Input Voltage range: DC 0 to 25 V
Voltage detection range: DC 0.02445 V to 25 V
Analog Voltage resolution : 0.00489 V
Dimensions: 28 x 14 x 13 mm(LxWxH).
Weight: 4 gm.₹35₹70In stock
-
Ultrasonic Sensor Module – HCSR04
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Sensing Range: 450 cm
- Frequency: 40 kHz
₹65₹8019% offIn stock
-
W1209 DC 12V Digital Temperature Controller Module With Display and NTC Temperature Sensor
- DC 12V
- P6 Settings
- Heating & Cooling Mode
- 7AMP (Approx)
₹130₹170In stock
-
CNC shield V3 for Engraving Machine 3D Printer
Specification:
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹140₹350In stock
-
Raspberry Pi 3 Model B+ Main Board
- Quad Core 1.2GHz Broadcom BCM2837 64bit CPU.
- 1GB RAM.
- BCM43438 wireless LAN and Bluetooth Low Energy (BLE) on board.
- 300 Base Ethernet.
- 1 Gb SRAM
- Dual Core Video Core IV Multimedia coprocessor.
- Single 2.0 USB connector.
₹3,850₹5,300In stock
-
IR Sensor Module – Infrared Proximity Sensor
- 5VDC Operating voltage
- I/O pins are 5V and 3.3V compliant
- Built-in Ambient Light Sensor
- 20mA supply current
- Mounting hole
- Adjustable Range Detection
- LED Indicators
₹40₹5020% offIn stock
-
Flame/Fire Sensor Module for digital Output
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
₹40₹100In stock
-
₹4,850
₹5,300Only 1 left in stock
-
Nano CH340 Board (Without Cable)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
₹230₹450In stock
-
Mega 2560 Board ATMEGA16U2 (Without Cable)
- Operating Voltage: 5 V
- Input Voltage (recommended): 7-12 V
- Input Voltage (limit): 54 (of which 15 provide PWM output)
- Digital I/O Pins: 16
- Analog Input Pins: 20 mA
₹1,250₹1,800In stock
-
Raindrops Detection Sensor Module
- Working voltage 5V
- Output format: Digital switching output (0 and 1), and analog voltage output AO
- Potentiometer adjust the sensitivity
- Uses a wide voltage LM393 comparator
₹50₹100In stock
-
LDR Module – Photosensitive Light-Dependent Sensor
- Operating Voltage: 3.6V to 5V DC
- Adjustable potentiometer to adjust the sensitivity
- LM393 comparator IC for digital output
- Easy to install thanks to bolt hole provided
- Digital Output
₹35₹60In stock
-
5MP Raspberry Pi Camera Module With Cable
Feature :
1. Use for: Raspberry Pi 4 Model B / 3B+ / 3B
2. 5 megapixels
3. Support max 1080P resolution
4. Mini size, easy to place and use.
Package list:
1 x 5MP Camera, 1 x 15cm Camera Cable
₹285₹450In stock
-
Arduino 1602 LCD Board Keypad Shield
- Operating Voltage: 5V
- 5 Push buttons to supply a custom menu control panel
- RST button for resetting Arduino program
- Integrate a potentiometer for adjusting the backlight
- Expanded available I/O pins
₹220₹300In stock
-
PRO MINI ATMEGA328P
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Support 9V battery.
₹250₹450In stock
-
Lilypad 328 ATmega328P
- Microcontroller : ATmega168 or ATmega328V
- Operating Voltage : 2.7-5.5 V
- Input Voltage : 2.7-5.5 V
- Digital I/O Pins : 14
- PWM Channels : 6
- Analog Input Channels : 6
₹500₹700In stock
-
HDMI to VGA Converter Adapter Cable
- Input: HDMI Male
- Output: VGA Female
- Power Supply: No external power required
- Resolution: 720/1080p
- Color : Black or White
₹200₹300In stock
-
DS18B20 Waterproof Digital Temperature Sensor – 1 Meter Cable
- Digital Output
- Waterproof
- High Precision
- One-Wire Interface
₹85₹110In stock
-
TowerPro SG90 9g Micro Servo Motor (180 Degree)
- Model: SG90
- Weight(gm): 9
- Rotational Degree: 180
- Operating Voltage: 3.0 – 7.2 V
- Operating Speed @4.8V: 0.12sec/60°
- Stall Torque @4.8V: 1.2 kg-cm
- Stall Torque @6.6V: 1.6 kg-cm
- Gear Type: Glass Fiber
₹100₹118In stock
-
NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board
- Uses CH340G instead of CP2102.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support UART / GPIO data communication interface
- A great set of tools to develop ESP8266
- Lowest cost WI-FI
- FOR Arduino like hardware IO
₹180₹30040% offIn stock
-
Micro SD Card Reader Module
- Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board
- Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
₹40₹80In stock
-
ESP8266 NodeMCU CP2102 Board
- Operating Voltage: 5V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
- UARTs: 1
- SPIs: 1
- I2Cs: 1
- Flash Memory: 4 MB
- SRAM: 64 KB
- Clock Speed: 80 MHz
₹275₹38529% offIn stock
-
HC05 Bluetooth Module
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK (Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
₹250₹330In stock
-
PIR Motion Detection Sensor – HC SR501
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
₹70₹120In stock
-
UNO SMD Version Board ATMEGA328 (Without Cable)
- Arduino Uno R3 SMD version
- Based on Atmel AVR Atmega328-AU MCU
- Clock: 16 Mhz
- Flash: 32 KB
- SRAM: 2 KB
- EEPROM: 1 KB
₹270₹49946% offIn stock
-
UNO DIP Version ATMEGA328 Board (Without Cable)
- Arduino Uno DIP Version Compatible Module
- 32 KB Flash
- 2 KB SRAM
- 1 KB EEPROM
- Frequency: 16 Mhz
₹450₹70036% offIn stock
-
Alligator Clips with Wires Test Lead (5 set)
- Connector Type: Alligator Clip (Crocodile)
- Cable Length: 45cm
- Color: Red, green, yellow, white and black
- Quantity: 5 Wires
₹75₹85In stock
-
DC Power Jack Barrel Connector Male
- DC Plug-in jack: 5.5mm
- Color: Black
₹10₹15In stock
-
DC Power Jack Barrel Connector Female Panel Mount
- Plug Type: 2.1 x 5.5 mm
- Pins: 3.
- Rated load: up to DC 30V / 1.0A.
₹10₹15In stock
-
DC Power Jack Barrel Connector Female PCB Mount
- Plug Type: 5.5 x 2.5mm
- Pins: 3.
- Rated load: up to DC 30V / 1.0A.
₹10₹15In stock
-
9V Battery Snap Connector with DC Barrel Jack Male
- Cable Length: 10cm
- Inner Diameter: 2.4mm
- Outer Diameter: 5.4mm
- Barrel Connections: Red-Inner Positive, Black- Outer Negative
₹15₹20In stock
-
9V Battery Snap Connector with Wire
- Connector Type 9V Battery Snap
- Wire Length 10 cm
- Wire Gauge 26 AWG
- Wire Type Red (positive) & Black (negative)
₹5₹10In stock
-
Metal Alligator Insulated Crocodile Clip Pair (Big 45mm)
- Length: 45 mm
- Color: Red & Black
- Insulating Material: Silicon
₹20₹25In stock
-
Metal Alligator Insulated Crocodile Clip Pair (Big 60mm)
Size: 60mm (Big)
Material: Metal
Insulation: Plastic or rubber coating
Per Pack: 2 pieces (Red & Black)₹25₹35In stock
-
Metal Alligator Insulated Crocodile Clip Pair (Small 28mm)
- Length: 28 mm
- Color: Red & Black
- Insulating Material: Silicon
₹10₹15In stock
-
Metal Alligator Insulated Crocodile Clip Pair (Small 34mm)
- Size: 34mm (small)
- Material: Metal
- Insulation: Plastic or rubber coating
- Per Pack: 2 pieces (Red & Black)
₹10₹15In stock
-
DC Power Jack Male Connector with 2 pin Screw Terminal
- The internal diameter of the plug: 2.1mm
- The external diameter of the plug: 5.5mm
₹20₹25In stock
-
DC Power Jack Female Connector with 2 pin Screw Terminal
- The internal diameter of the plug: 2.1mm
- The external diameter of the plug: 5.5mm
₹20₹25In stock
-
DC Jack Male Power Connector With Wire
Standard Barrel Sizes – 2.1mm inner diameter
₹10₹25In stock
-
DC Jack Female Power Connector With Wire
- DC Power Jack Type: Female
- Inner Diameter: 2.1mm
- Outer Diameter: 5.5mm
₹10₹25In stock
-
Rainbow Ribbon Wire Cable 10 Core (1 meter)
- Length: 1 meter
- Color: 10 colors
- Wire Gauge: 14/36 (21 AWG)
- Type: Multi-Strand 10 core
₹50₹70In stock
-
MultiCore Wire Red & Black (1 Meter)
- Length: 1 meter
- Color: Red & Black
- Wire Gauge: 18 AWG
- Type: Multi-Strand
₹15₹25In stock
-
Single Strand Hookup Wire Pack
- Meter: 9.2 meters (5 colors)
- colors: Red, Black, Green, Yellow, Blue
- Model: 1/0.20
₹40₹55In stock
-
Dot PCB Prototyping Board 4 x 6 inches (Perfboards)
This is 4 inch by 6 inch high quality single sided Universal PCB Prototyping Board with standard 0.1″ spacing through Holes. This board can be used to build Small sized circuits.
₹50₹70In stock
-
ESD Anti-Static PU Top fit Gloves
ESD PU top fit gloves with carbon filament are ideal for use when handling or transporting devices and components that are susceptible to damage from electrostatic discharge.
Per Pack : 1 Pair ESD Gloves
₹60₹90In stock
-
Glue Gun Stick Milky White (5pcs)
- Diameter: 11mm
- Length: 22cm
- Colour: Milky White
- Per Pack: 5pcs
₹100₹150In stock
-
60W Hot Glue Gun – Good Quality
- Power: 60W
- Voltage: 100-240V AC
- Temperature Range: 380°F to 430°F (193°C to 221°C) Approx
- Heating Time: 2-5 minutes
- Nozzle Type: Precision tip
- Trigger Feed: Smooth trigger mechanism for controlled glue flow
₹185₹270In stock
-
Hot Air Heat Gun 1800W- Good Quality
- Power Consumption: 1800 W
- Weight: 1.200
- Variable Temperature Control: Yes
₹860₹1,000Only 5 left in stock
-
Multi-function LED Magnifier PCB Soldering Helping Hand TE-801
- A useful Aid for soldering work or model makers
- Battery required for light: 3 x AAA
- Adjustable crocodile holding clamps
- The bottom battery compartment is furnished with steel plate which can enhance stability
- Ideal when a third hand is needed
- With two LED lighting, this model can work very well in the dark environment
₹520₹710In stock
-
Soldering Iron 25W SOLDRON Original
- Low leakage current.
- Safe for use with sensitive and specialized Components.
- Highest heat transfer effectiveness.
- Insulating nylon handle with high-quality grip.
- Easy to use, portable, and lightweight soldering gun.
₹350₹427In stock
