All Categories
-
Voltage Detection Sensor Module (0-25V)
Input Voltage range: DC 0 to 25 V
Voltage detection range: DC 0.02445 V to 25 V
Analog Voltage resolution : 0.00489 V
Dimensions: 28 x 14 x 13 mm(LxWxH).
Weight: 4 gm.₹35₹70In stock
-
Ultrasonic Sensor Module – HCSR04
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Sensing Range: 450 cm
- Frequency: 40 kHz
₹65₹8019% offIn stock
-
W1209 DC 12V Digital Temperature Controller Module With Display and NTC Temperature Sensor
- DC 12V
- P6 Settings
- Heating & Cooling Mode
- 7AMP (Approx)
₹130₹170In stock
-
CNC shield V3 for Engraving Machine 3D Printer
Specification:
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹140₹350In stock
-
Raspberry Pi 3 Model B+ Main Board
- Quad Core 1.2GHz Broadcom BCM2837 64bit CPU.
- 1GB RAM.
- BCM43438 wireless LAN and Bluetooth Low Energy (BLE) on board.
- 300 Base Ethernet.
- 1 Gb SRAM
- Dual Core Video Core IV Multimedia coprocessor.
- Single 2.0 USB connector.
₹3,850₹5,300In stock
-
IR Sensor Module – Infrared Proximity Sensor
- 5VDC Operating voltage
- I/O pins are 5V and 3.3V compliant
- Built-in Ambient Light Sensor
- 20mA supply current
- Mounting hole
- Adjustable Range Detection
- LED Indicators
₹40₹5020% offIn stock
-
Flame/Fire Sensor Module for digital Output
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
₹40₹100In stock
-
₹4,850
₹5,300Only 1 left in stock
-
Nano CH340 Board (Without Cable)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
₹230₹450In stock
-
Mega 2560 Board ATMEGA16U2 (Without Cable)
- Operating Voltage: 5 V
- Input Voltage (recommended): 7-12 V
- Input Voltage (limit): 54 (of which 15 provide PWM output)
- Digital I/O Pins: 16
- Analog Input Pins: 20 mA
₹1,250₹1,800In stock
-
Raindrops Detection Sensor Module
- Working voltage 5V
- Output format: Digital switching output (0 and 1), and analog voltage output AO
- Potentiometer adjust the sensitivity
- Uses a wide voltage LM393 comparator
₹50₹100In stock
-
LDR Module – Photosensitive Light-Dependent Sensor
- Operating Voltage: 3.6V to 5V DC
- Adjustable potentiometer to adjust the sensitivity
- LM393 comparator IC for digital output
- Easy to install thanks to bolt hole provided
- Digital Output
₹35₹60In stock
-
5MP Raspberry Pi Camera Module With Cable
Feature :
1. Use for: Raspberry Pi 4 Model B / 3B+ / 3B
2. 5 megapixels
3. Support max 1080P resolution
4. Mini size, easy to place and use.
Package list:
1 x 5MP Camera, 1 x 15cm Camera Cable
₹285₹450In stock
-
Arduino 1602 LCD Board Keypad Shield
- Operating Voltage: 5V
- 5 Push buttons to supply a custom menu control panel
- RST button for resetting Arduino program
- Integrate a potentiometer for adjusting the backlight
- Expanded available I/O pins
₹220₹300In stock
-
PRO MINI ATMEGA328P
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Support 9V battery.
₹250₹450In stock
-
Lilypad 328 ATmega328P
- Microcontroller : ATmega168 or ATmega328V
- Operating Voltage : 2.7-5.5 V
- Input Voltage : 2.7-5.5 V
- Digital I/O Pins : 14
- PWM Channels : 6
- Analog Input Channels : 6
₹500₹700In stock
-
HDMI to VGA Converter Adapter Cable
- Input: HDMI Male
- Output: VGA Female
- Power Supply: No external power required
- Resolution: 720/1080p
- Color : Black or White
₹200₹300In stock
-
DS18B20 Waterproof Digital Temperature Sensor – 1 Meter Cable
- Digital Output
- Waterproof
- High Precision
- One-Wire Interface
₹85₹110In stock
-
TowerPro SG90 9g Micro Servo Motor (180 Degree)
- Model: SG90
- Weight(gm): 9
- Rotational Degree: 180
- Operating Voltage: 3.0 – 7.2 V
- Operating Speed @4.8V: 0.12sec/60°
- Stall Torque @4.8V: 1.2 kg-cm
- Stall Torque @6.6V: 1.6 kg-cm
- Gear Type: Glass Fiber
₹100₹118In stock
-
NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board
- Uses CH340G instead of CP2102.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support UART / GPIO data communication interface
- A great set of tools to develop ESP8266
- Lowest cost WI-FI
- FOR Arduino like hardware IO
₹180₹30040% offIn stock
-
Micro SD Card Reader Module
- Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board
- Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
₹40₹80In stock
-
ESP8266 NodeMCU CP2102 Board
- Operating Voltage: 5V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
- UARTs: 1
- SPIs: 1
- I2Cs: 1
- Flash Memory: 4 MB
- SRAM: 64 KB
- Clock Speed: 80 MHz
₹275₹38529% offIn stock
-
HC05 Bluetooth Module
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK (Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
₹250₹330In stock
-
PIR Motion Detection Sensor – HC SR501
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
₹70₹120In stock
-
UNO SMD Version Board ATMEGA328 (Without Cable)
- Arduino Uno R3 SMD version
- Based on Atmel AVR Atmega328-AU MCU
- Clock: 16 Mhz
- Flash: 32 KB
- SRAM: 2 KB
- EEPROM: 1 KB
₹270₹49946% offIn stock
-
UNO DIP Version ATMEGA328 Board (Without Cable)
- Arduino Uno DIP Version Compatible Module
- 32 KB Flash
- 2 KB SRAM
- 1 KB EEPROM
- Frequency: 16 Mhz
₹450₹70036% offIn stock
-
Digital Voltmeter Indicator YELLOW AC20-500V 22MM AD16-22DSV
- Model No.: AD16-22DSV
- Voltage: AC 20-500V
- Color: Yellow
₹90₹110In stock
-
Digital Voltmeter Indicator GREEN AC20-500V 22MM AD16-22DSV
- Model No.: AD16-22DSV
- Voltage: AC 20-500V
- Colour: Green
₹90₹110In stock
-
Digital Voltmeter Indicator RED AC20-500V 22MM AD16-22DSV
- Model No.: AD16-22DSV
- Voltage: AC 20-500V
- Color: Red
₹90₹110In stock
-
DC Mini Voltmeter Three Wire 0-100V (0.28 inch)
- Color: Green, Red, Blue
- Wires: 3wire
- Display ON Voltage: 3V
- Operating Voltage: 3V ~ 30V DC
- Measuring Range: 0 ~ 100V
- Current Consumption: 10mA
- Minimum Input: 3V
- Highest Input: 30V
₹55₹85In stock
-
Digital Volt+AMP Meter DC 10A 0-100V
- Color:Red (Voltage), Blue (Current)
- Operating Voltage (VDC): 5V to 30V DC
- Current Consumption (mA): 60mA
- Measuring Voltage Range: 0V to 100V DC
- Measuring Current Range: 10A
₹110₹175In stock
-
ESP32-CAM-MB MICRO USB Module
- Model: ESP32-CAM-MB
- Chipset: CH340G
- Connectivity: MICRO USB
₹100₹120In stock
-
ESP32 CAM Module with Camera
- 2MP OV2640 or OV3660 camera module with Bluetooth
- Perfect for DIY projects and skill development
- Ideal for surveillance and wireless monitoring
- Supports WiFi, Bluetooth, and BLE Beacon
₹650₹740In stock
-
SIM900A GSM GPRS Module with RS232 Interface and SMA Antenna
- Module: SIM900A GSM/GPRS Module
- Frequency Bands: GSM 850/900/1800/1900 MHz (Quad-band)
- SIM Support: Standard 2G SIM Card
- Operating Voltage: 5V (recommended 12V external supply)
- Interface: UART (TX/RX) @ 9600 baud (default)
- Functions: SMS, Voice Call, GPRS Data
- Antenna Connector: SMA or PCB Antenna (varies by model)
- Power Consumption: Idle: ~10mA, Transmit: ~200mA+ (Approx)
- Dimensions: ~45mm x 50mm x 15mm (Approx)
₹880₹980In stock
-
Alligator Clips with Wires Test Lead (5 set)
- Connector Type: Alligator Clip (Crocodile)
- Cable Length: 45cm
- Color: Red, green, yellow, white and black
- Quantity: 5 Wires
₹75₹85In stock
-
DC Power Jack Barrel Connector Male
- DC Plug-in jack: 5.5mm
- Color: Black
₹10₹15In stock
-
DC Power Jack Barrel Connector Female Panel Mount
- Plug Type: 2.1 x 5.5 mm
- Pins: 3.
- Rated load: up to DC 30V / 1.0A.
₹10₹15In stock
-
DC Power Jack Barrel Connector Female PCB Mount
- Plug Type: 5.5 x 2.5mm
- Pins: 3.
- Rated load: up to DC 30V / 1.0A.
₹10₹15In stock
-
9V Battery Snap Connector with DC Barrel Jack Male
- Cable Length: 10cm
- Inner Diameter: 2.4mm
- Outer Diameter: 5.4mm
- Barrel Connections: Red-Inner Positive, Black- Outer Negative
₹15₹20In stock
-
9V Battery Snap Connector with Wire
- Connector Type 9V Battery Snap
- Wire Length 10 cm
- Wire Gauge 26 AWG
- Wire Type Red (positive) & Black (negative)
₹5₹10In stock
-
Metal Alligator Insulated Crocodile Clip Pair (Big 45mm)
- Length: 45 mm
- Color: Red & Black
- Insulating Material: Silicon
₹20₹25In stock
-
Metal Alligator Insulated Crocodile Clip Pair (Big 60mm)
Size: 60mm (Big)
Material: Metal
Insulation: Plastic or rubber coating
Per Pack: 2 pieces (Red & Black)₹25₹35In stock
-
Metal Alligator Insulated Crocodile Clip Pair (Small 28mm)
- Length: 28 mm
- Color: Red & Black
- Insulating Material: Silicon
₹10₹15In stock
-
Metal Alligator Insulated Crocodile Clip Pair (Small 34mm)
- Size: 34mm (small)
- Material: Metal
- Insulation: Plastic or rubber coating
- Per Pack: 2 pieces (Red & Black)
₹10₹15In stock
-
DC Power Jack Male Connector with 2 pin Screw Terminal
- The internal diameter of the plug: 2.1mm
- The external diameter of the plug: 5.5mm
₹20₹25In stock
-
DC Power Jack Female Connector with 2 pin Screw Terminal
- The internal diameter of the plug: 2.1mm
- The external diameter of the plug: 5.5mm
₹20₹25In stock
-
DC Jack Male Power Connector With Wire
Standard Barrel Sizes – 2.1mm inner diameter
₹10₹25In stock
-
DC Jack Female Power Connector With Wire
- DC Power Jack Type: Female
- Inner Diameter: 2.1mm
- Outer Diameter: 5.5mm
₹10₹25In stock
-
Rainbow Ribbon Wire Cable 10 Core (1 meter)
- Length: 1 meter
- Color: 10 colors
- Wire Gauge: 14/36 (21 AWG)
- Type: Multi-Strand 10 core
₹50₹70In stock
-
MultiCore Wire Red & Black (1 Meter)
- Length: 1 meter
- Color: Red & Black
- Wire Gauge: 18 AWG
- Type: Multi-Strand
₹15₹25In stock
