-
Cable for Arduino Nano USB A to USB Mini 2.0 (1.2 Meters)
- USB 2.0 A to USB Mini Cable
- Length: 1.2 meters
₹48.00₹70.00(Incl GST)In stock
-
Cable For Arduino UNO/MEGA (USB A to B) 30CM
- USB 2.0 A to B Cable
- Length: 30cm meters
₹29.00₹50.00(Incl GST)In stock
-
Cable for Arduino Uno / Mega USB 2.0 A to B (1.2 Meters)
- USB 2.0 A to B Cable
- Length: 1.2 meters
₹48.00₹70.00(Incl GST)In stock
-
L293D Motor Driver/Servo Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- Pull down resistors keep motors disabled during power-up
- Arduino reset button brought up top
₹135.00₹250.00(Incl GST)In stock
-
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
₹550.00₹620.00(Incl GST)In stock
-
Arduino Uno R3 Compatible – SMD Version (Without Cable)
- Arduino Uno R3 SMD version
- Based on Atmel AVR Atmega328-AU MCU
- Clock: 16 Mhz
- Flash: 32 KB
- SRAM: 2 KB
- EEPROM: 1 KB
₹273.00₹499.00(Incl GST) 45% offIn stock
-
Arduino Uno R3 Compatible – DIP Version (Without Cable)
- Arduino Uno DIP Version Compatible Module
- 32 KB Flash
- 2 KB SRAM
- 1 KB EEPROM
- Frequency: 16 Mhz
₹498.00₹700.00(Incl GST) 29% offIn stock
-
CNC shield V3 for Engraving Machine 3D Printer
Specification:
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹139.00₹350.00(Incl GST)In stock
-
Arduino 1602 LCD Board Keypad Shield
- Operating Voltage: 5V
- 5 Push buttons to supply a custom menu control panel
- RST button for resetting Arduino program
- Integrate a potentiometer for adjusting the backlight
- Expanded available I/O pins
₹220.00₹300.00(Incl GST)In stock
-
ARDUINO PRO MINI ATMEGA328P
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Support 9V battery.
₹250.00₹450.00(Incl GST)In stock
-
Arduino Nano CH340 Chip Board Compatible (Without Cable)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
₹259.00₹450.00(Incl GST)In stock
-
Arduino Mega 2560 R3 ATMEGA16U2 compatible (Without Cable)
- Operating Voltage: 5 V
- Input Voltage (recommended): 7-12 V
- Input Voltage (limit): 54 (of which 15 provide PWM output)
- Digital I/O Pins: 16
- Analog Input Pins: 20 mA
₹1,249.00₹1,800.00(Incl GST)In stock