All Categories
-
SanDisk 32GB Micro SD Card – Class10
- Memory Size: 32 Gigabyte
- Card Type: Micro SD
- Data transfer Speed: up to 98MB/s
- Class: 10
₹429₹550In stock
-
ESP8266 NodeMCU CP2102 Board
- Operating Voltage: 5V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
- UARTs: 1
- SPIs: 1
- I2Cs: 1
- Flash Memory: 4 MB
- SRAM: 64 KB
- Clock Speed: 80 MHz
₹275₹38529% offIn stock
-
RC522 RFID 13.56MHZ Reader Writer Module / MFRC-522 Module with RFID Tag
- Operating Voltage: 3.3V
- Operating Current: 13-26 mA
- Operating Frequency: 13.56MHz
- Communication Interface: SPI protocol
- Reader Distance: less than 5cm
- Data Transfer Rate: 10Mbit/sec(max)
₹90₹150In stock
-
NRF24L01 2.4GHz Wireless Transceiver Module
- Low working voltage: 1.9 to 3.6 V
- I/O input voltage: 5V
- Wireless rate: 1 or 2 MBPS
- SPI interface rate: 0 to 8MBPS
- Transmission distance: 200 meters
- Dimensions: Width: 30 mm, Height: 10 mm, Depth: 20 mm
- Weight: 30 g
₹85₹120In stock
-
HC05 Bluetooth Module
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK (Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
₹250₹330In stock
-
NEO6M GPS Module with EEPROM with Antenna
• Operating temperature range: -40 TO 85°C UART TTL socket
• EEPROM to save configuration settings
• Rechargeable battery for Backup
• The cold start time of 38 s and Hot start time of 1 s
• Supply voltage: 3.3 V
• Separate GPS antenna₹300₹400In stock
-
SIM800L GSM GPRS Module Quad-band TTL Serial Port with antenna
• 2G Quad-band 850/900/1800/1900MHz
• Receive and make calls using the speaker and microphone outputs
• Receive and send SMS
• GPRS multi-slot class12 connectivity: max. 85.6kbps(download/upload)
• Operating Voltage range 3.4V ~ 4.4V
• Supports A-GPS
• Low power consumption, 1mA in sleep mode
• Micro SIM Card Slot₹270₹350In stock
-
RF 433MHz Wireless Transmitter Receiver Module (Red)
Features :
- Low Power Consumption.
- Easy For RF-based Application.
- Wide Operating Voltage (1.5-5v)
- ASK Modulation
₹140₹220In stock
-
Selec TS1W1-1-20A-230V AC Digital Time Switch
- Daily/weekly setting – 50 ON-OFF Steps
- Wall mount, 12/24 hr display format
- 16 holiday settings
- Relay op modes: Auto, permanent ON, permanent OFF
₹970₹1,250Out of stock
-
Selec CH403-1-NTC Temperature Controller
- 3 Digits, 7 Segment LED Single Display
- LED Status Indicator: Set Point Lock, Defrost, Relay ON, Alarm ON
- C/ F Selectable
- Defrost Management
- High & Low Temperature Alarm
- Compact Size
₹1,150₹1,590In stock
-
Selec 800 XC Din Rail Timer
- On delay / Interval, 12 Time Ranges
- 12 Time ranges, ON delay / Interval
- LED Indications : Power ON, Relay ON
- Universal power supply
₹1,190₹2,000Only 5 left in stock
-
Selec 600DT Digital Din rail Timer
- 15 Functions, 9 Time ranges
- Front key pad setting
- Universal supply voltage
- Slim, Space saving design
₹1,550₹2,058Only 5 left in stock
-
MECO 101B+ Pocket Size Digital Multimeter
- 4000 Counts
- Autoranging
- DC Voltage upto 1000V
- AC Voltage upto 750V
- DC Current upto 10A
- AC Current upto 10A
- Resistance upto 40MΩ
- Capacitance upto 200.0µF
- Frequency upto 10.00MHz
- Duty Cycle 0.1% ~ 99.9%
₹1,610₹2,000Out of stock
-
HTC DM98 TRMS Digital Multimeter
- 5,999 COUNT
- AUTO RANGE
- AUTO POWER OFF
- MAX/MIN HOLD
- DUAL LCD WITH BARGRAPH
- LIVE TEST (SOUND AND LIGHT ALARM)
- NCV
- TRUE RMS
- DOUBLE COLOUR BACKLIGHT
- INPUT JACK LED INDICATOR
₹2,020₹2,100Out of stock
-
HTC DIGITAL MULTIMETER 830L+
Display: 3½ LCD, Max. display 1999.
Polarity: Automatic polarity display.
Over-range display: Display “1”.
Working environment: (0~40)℃, relative humidity <75%.
Storage environment: (-15~50) ℃.
Battery: 2pcs 1.5V battery (“AAA” 7# battery).
Battery life: About 200 hours for alkaline battery, and 100 hours for carbon battery.
Dimension&Weight: 140mm(L) x 72mm(W) x 37mm(H), N.W: 195g₹620₹720Out of stock
-
Raindrops Detection Sensor Module
- Working voltage 5V
- Output format: Digital switching output (0 and 1), and analog voltage output AO
- Potentiometer adjust the sensitivity
- Uses a wide voltage LM393 comparator
₹50₹100In stock
-
Voltage Detection Sensor Module (0-25V)
Input Voltage range: DC 0 to 25 V
Voltage detection range: DC 0.02445 V to 25 V
Analog Voltage resolution : 0.00489 V
Dimensions: 28 x 14 x 13 mm(LxWxH).
Weight: 4 gm.₹35₹70In stock
-
Ultrasonic Sensor Module – HCSR04
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Sensing Range: 450 cm
- Frequency: 40 kHz
₹65₹8019% offIn stock
-
LDR Module – Photosensitive Light-Dependent Sensor
- Operating Voltage: 3.6V to 5V DC
- Adjustable potentiometer to adjust the sensitivity
- LM393 comparator IC for digital output
- Easy to install thanks to bolt hole provided
- Digital Output
₹35₹60In stock
-
PIR Motion Detection Sensor – HC SR501
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
₹70₹120In stock
-
IR Sensor Module – Infrared Proximity Sensor
- 5VDC Operating voltage
- I/O pins are 5V and 3.3V compliant
- Built-in Ambient Light Sensor
- 20mA supply current
- Mounting hole
- Adjustable Range Detection
- LED Indicators
₹40₹5020% offIn stock
-
Flame/Fire Sensor Module for digital Output
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
₹40₹100In stock
-
UNO SMD Version Board ATMEGA328 (Without Cable)
- Arduino Uno R3 SMD version
- Based on Atmel AVR Atmega328-AU MCU
- Clock: 16 Mhz
- Flash: 32 KB
- SRAM: 2 KB
- EEPROM: 1 KB
₹270₹49946% offIn stock
-
UNO DIP Version ATMEGA328 Board (Without Cable)
- Arduino Uno DIP Version Compatible Module
- 32 KB Flash
- 2 KB SRAM
- 1 KB EEPROM
- Frequency: 16 Mhz
₹450₹70036% offIn stock
-
DHT11 Temperature And Humidity Sensor Module
- Power Supply: 3.3~5.5V DC
- Output: 4 pin single row
- Measurement Range: Humidity 20-90%RH, Temperature 0~50?
- Accuracy: Humidity +-5%RH, Temperature +-2?
- Resolution: Humidity 1%RH, Temperature 1?
₹65₹102In stock
-
₹4,850
₹5,300Only 1 left in stock
-
Raspberry Pi 3 Model B+ Main Board
- Quad Core 1.2GHz Broadcom BCM2837 64bit CPU.
- 1GB RAM.
- BCM43438 wireless LAN and Bluetooth Low Energy (BLE) on board.
- 300 Base Ethernet.
- 1 Gb SRAM
- Dual Core Video Core IV Multimedia coprocessor.
- Single 2.0 USB connector.
₹3,850₹5,300In stock
-
HDMI to VGA Converter Adapter Cable
- Input: HDMI Male
- Output: VGA Female
- Power Supply: No external power required
- Resolution: 720/1080p
- Color : Black or White
₹200₹300In stock
-
5MP Raspberry Pi Camera Module With Cable
Feature :
1. Use for: Raspberry Pi 4 Model B / 3B+ / 3B
2. 5 megapixels
3. Support max 1080P resolution
4. Mini size, easy to place and use.
Package list:
1 x 5MP Camera, 1 x 15cm Camera Cable
₹285₹450In stock
-
CNC shield V3 for Engraving Machine 3D Printer
Specification:
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹140₹350In stock
-
Arduino 1602 LCD Board Keypad Shield
- Operating Voltage: 5V
- 5 Push buttons to supply a custom menu control panel
- RST button for resetting Arduino program
- Integrate a potentiometer for adjusting the backlight
- Expanded available I/O pins
₹220₹300In stock
-
PRO MINI ATMEGA328P
- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Support 9V battery.
₹250₹450In stock
-
Nano CH340 Board (Without Cable)
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
₹230₹450In stock
-
Mega 2560 Board ATMEGA16U2 (Without Cable)
- Operating Voltage: 5 V
- Input Voltage (recommended): 7-12 V
- Input Voltage (limit): 54 (of which 15 provide PWM output)
- Digital I/O Pins: 16
- Analog Input Pins: 20 mA
₹1,250₹1,800In stock
-
Lilypad 328 ATmega328P
- Microcontroller : ATmega168 or ATmega328V
- Operating Voltage : 2.7-5.5 V
- Input Voltage : 2.7-5.5 V
- Digital I/O Pins : 14
- PWM Channels : 6
- Analog Input Channels : 6
₹500₹700In stock
