- “ESP8266 NodeMCU CP2102 Board” already exists in your wishlist
-
IRF540 N-Channel Power MOSFET TO-220 Package
- Model: IRF540N
- Package: TO-220
- Type: N Channel
- Mounting: Through Hole
- Drain Current (Id): 30A
- Power Dissipation (Ptot): 150W
- Drain-Source Volt (Vds): 100V
₹25₹39In stock
-
IRFZ44N MOSFET N-Channel Power MOSFET TO-220 Package
- Model: IRFZ44N
- Package: TO-220
- Type: N Channel
- Mounting: Through Hole
- Drain Current (Id): 49A
- Power Dissipation (Ptot): 83W
- Drain-Source Volt (Vds): 55V
₹25₹29In stock
-
LM741 UA741 General Purpose Op-Amp IC DIP-8 Package
- of channel: 1 channel.
- Supply voltage: 10v to 44v.
- Operating temp.: -55 to 125 degrees centigrade.
- CMRR: 90 db.
₹10₹15In stock
-
LM358 Dual Op-Amp IC DIP-8 Package
- Single Supply Operation: 3.0 V to 32 V
- Single and Split Supply Operation
- Low power drain; suitable for battery usage
- Internally Compensated
- Large DC voltage gain
₹10₹13In stock
-
LM324 Low Power Quad Op-Amp IC DIP-14 Package
- Single Supply 3 V to 32 V
- Large DC Voltage Gain 100 dB
- Very Low Supply Current Drain (700 μA)
- Low Input Biasing Current 45 nA (Temperature Compensated)
- Low Input Offset Voltage 2 mV and Offset Current: 5 nA
- Large Output Voltage Swing 0 V to V + − 1.5 V
₹15₹17In stock
-
ULN2003 7 Darlington Transistor Arrays IC DIP-16 Package
- Seven Darlington per package
- Output current 500 mA per driver (600 mA peak)
- Integrated suppression diodes for inductive loads
- TTL/CMOS/PMOS/DTL compatible inputs
₹18₹19In stock
-
L293D Dual H-Bridge Motor Controller/ Driver IC DIP-16 Package
- Wide Supply-Voltage Range: 4.5 V to 36 V.
- Separate Input-Logic Supply.
- High-Noise-Immunity Inputs.
- Output Current 1 A Per Channel (600 mA for L293D).
- Peak Output Current 2 A Per Channel (1.2 A for L293D).
₹40₹49In stock
-
Piezo Electronic Buzzer Alarm Continuous Sound 3v-12v
- Supply Voltage:3V TO 12VDC
- Sound Output: 85dB
- Color: Black
- Wire Length: 100mm
₹25₹35In stock
-
5V Active Electromagnetic Buzzer
- Input Voltage (Max.): 5V
- Body Size: 12 x 9.5mm
- Pin Pitch: 6mm
- External Material: Plastic;
- Color: Black
₹15₹19In stock
-
150pcs 30 Value 1/4W Assorted CFR Resistor Kit
- Quantity: 150pcs (All Values)
- Values: 30 different values
- Capacitance Tolerance: ±10%
- Watts Rating: 1/4W (0.25W)
- Resistor Type: CFR
₹40₹69In stock
-
120pcs 12 Value Assorted Electrolytic Capacitor Kit
- Quantity: 120pcs (All Values)
- Values: 12 different values
- Capacitance Tolerance: ±20%
- Voltage Rating: 16v, 25V and 50V
- Capacitor Type: Electrolytic
₹120₹189In stock
-
HX710B Air Pressure (0-40Kpa) Sensor Module
- Easy Amplification
- Analog-to-Digital Conversion (ADC)
- High Resolution
- Easy to Interface
- Low Noise
- High Calibration
₹150₹19925% offIn stock
-
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Barometric Pressure Measurement
- Altitude Calculation
- Temperature Measurement
- Digital Output
- High Precision
- Low Power Consumption
- Compact Size
₹50₹70In stock
-
BMP180 Digital Barometric Pressure Sensor Module
- Barometric Pressure Measurement
- Temperature Measurement
- Digital Output
- High Accuracy
- Low Power Consumption
- Compact Size
₹50₹80In stock
-
E18-D80NK Adjustable Infrared Sensor Switch 3-80cm
- Adjustable Sensing Range
- Digital Output
- Reliability
- Compact Size
- Wide Range of Applications
₹170₹219In stock
-
MPU6050 3-Axis Accelerometer and Gyro Sensor Module
- 3-Axis Motion Sensing
- Digital Output
- High Precision
- Low Power Consumption
- Motion Detection Features
- Digital Motion Processing
₹230₹280In stock
-
ADXL345 3-Axis Accelerometer Module
- 3-Axis Measurement
- Digital Output
- High Resolution
- Low Power Consumption
- Wide Sensing Range
- Tap/Double-Tap Detection
- Freefall Detection
₹180₹200In stock
-
ADXL335 Module 3-axis Analog Output Accelerometer GY-61
- 3-Axis Measurement
- Analog Output
- Low Power Consumption
- Wide Sensing Range
- Small Form Factor
₹420₹480In stock
-
ESP32 30Pin Development Board WiFi+Bluetooth (WROOM-32)
- ESP32-WROOM-32 Based Development board
- It supports WiFi, Bluetooth, Bluetooth Low Energy
- Dual Core MCU
- Clock Frequency of upto 240 Mhz
- Upto 512 KB RAM
- Available Peripherals: Capactive Touch, ADCs, DACs, UART, SPI, I2C and more
₹350₹390In stock
-
ESP32 38Pin Development Board WiFi+Bluetooth (WROOM-32)
- Operating Voltage: 3.3V
- DC Current on I/O Pins: 40 mA
- DC Current on 3.3V Pin: 50 mA
- Communication: SPI, I2C, I2S, CAN, UART
- Has on-board enable and reset pins
₹420₹489In stock
-
Alkon Component Organizer with 39 Drawers ACO39
Cabinet Dimension- 457 H X 424 W X 164 D mm
BIG Drawer Dimension- 153 L X 127 W X 58 H mm
SMALL Drawer Dimension- 153 L X 62 W X 37 H mm₹2,650₹2,790In stock
-
840 Points Solderless Breadboard – GL12
- Matching jumper, diameter 0.8mm
- Four independent common bus lines
- Dimensions:11 x 5 x 1cms
₹60₹100In stock
-
830 Points Solderless Breadboard – MB102
- Matching jumper, diameter 0.8mm
- Four independent common bus lines
- Dimensions:55 x 170 x 10mm
₹55₹80In stock
-
400 Points Solderless Mini Breadboard
- Matching jumper, diameter 0.8mm
- Four independent common bus lines
- Dimensions:84×53.3×8.3mm
₹40₹80In stock
-
170 points Mini Breadboard SYB-170
- Matching jumper, diameter 0.8mm
- Tie-points: 170 (10×17)
- Size: 48 x 35 x 10 mm (LxWxH).
₹25₹40In stock
-
Metasol 50W 230V High Quality Soldering Iron
- Brand: Metasol
- Max Temperature: 460c
- Auto Temperature Control: No
- Operating Voltage: 150~230V
- Rated Power: 50W
- Plug Type: Round Indian
- Weight (gm): 140
₹380₹427In stock
-
Metasol 35W 230V High Quality Soldering Iron
- Brand: Metasol
- Max Temperature(°C): 480
- Operating Voltage (VDC): 230 VAC
- Power Rating: 35W
- Color: Orange
- Weight (gm): 135
- Cable Length: 1.5 Meter
₹340₹395In stock
-
Metasol 25W 230V High Quality Soldering Iron
- Brand: Metasol
- Max Temperature(°C): 380
- Operating Voltage (VDC): 230 VAC
- Power Rating: 25W
- Color: Yellow
- Weight (gm): 120
₹260₹337In stock
-
Wadfow Li-Ion Cordless Screwdriver 4V – WCV4404
- Voltage:4V
- Hex Shank:1/4″
- No-load speed:180/min
- torque:4NM
- Integrated work light
- Charge level indicator
₹780₹1,199In stock
-
L293D Motor Driver/Servo Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- Pull down resistors keep motors disabled during power-up
- Arduino reset button brought up top
₹140₹250In stock
-
BTS7960 43A H-Bridge High Power Stepper Motor Driver Module
- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
₹280₹550In stock
-
A4988 Stepper Motor Driver Module
- Supply Voltage: 8-35 VDC.
- Current: 1.0A (no heatsink)
- Current: 2.0A (with heat-sinking)
- logic input: 3 – 5.5V
₹80₹110In stock
-
L298N 2A Dual Motor Driver Module With PWM Control
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip: L298N.
- Operating Voltage (VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- of Channels: 2
₹130₹180In stock
-
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
₹550₹620In stock
-
USB to RS485 Converter Adapter
- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Supports Plug, Play and hot-swap (USB side)
- Better than using CH341D chip or similar chip to support the laptop USB port.
- Communication distance up to 1.2KM
₹120₹150In stock
-
PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin
- Fully Compliant with USB Specification v2.0 (Full-Speed)
- Supports RS-232 serial interface
- On chip USB 1.1 transceiver, 5V to 3.3V regulator
- Two data transmission LEDs that indicate data transfer status in real time
- Has a 500mA self-recovery fuse for safety
₹85₹120In stock
-
5V 4 Channel Relay Module with Optocoupler
- of Channel: 4
- Trigger Level: LOW
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
₹140₹200In stock
-
5V 2 Channel Relay Module with Optocoupler
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage (3.3V – 5V)
₹85₹120In stock
-
5V 1 Channel Relay Module
- Trigger Voltage: 5 VDC
- Trigger Level: LOW
- Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
- Single Pole Double Throw (SPDT) Configuration
- Power supply indicator LED
₹40₹70In stock
-
Micro HDMI Male to HDMI Female Adapter for Raspberry Pi
- Micro HDMI Male to HDMI Female
- Gold plated connectors for flawless signal transference
- CE and ROHS Compliant
- For the Raspberry Pi
₹60₹80In stock
-
WeMos D1 R2 WiFi ESP8266 Development Board
- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
- Based on the ESP-8266EX.
- Arduino Compatible, you can use it on Arduino IDE.
- NodeMcu Compatible
₹350₹380In stock
-
Wemos D1 Mini ESP8266 NodeMcu Lua WIFI IOT Development Board
- Driver IC: CH340
- 11 digital input/output pins
- 1 analog input (3.2V max input)
- Micro USB connection
- Use BRT (Bias Resistor Transistor), easier into flash mode.
- Compatible with Arduino
- Compatible with NodeMCU
- Compatible with MicroPython
₹165₹27039% offIn stock
-
USB To UART/ESP8266 Adapter Programmer For ESP-01 WiFi Modules With CH340G Chip
- Driver Chip: CH340G
- Supports all basic windows versions.
- Working voltage: 4.5V – 5.5V
- Working current: 300mA
₹100₹120In stock
-
MT76813DBI ESP8266 Serial WIFI Wireless Gain Antenna
- Radome material: polyurethane
- Flexible cable
- Stable signal
- Best for indoor applications.
₹70₹80In stock
-
FS1000A 433mHz Transmitter Receiver RF Radio Module
- Wide input supply (2.5 V to 12V)
- Easy to integrate (V+, GND, and Data)
- The device in deep sleep mode when Data pin is grounded
- Very small dimension.
₹100₹120In stock
-
Infrared IR Wireless Remote Control Module Kit
- Battery: CR2025 160mAh button battery
- Effective angle: 60°
- Sticking material: 0.125mmPET
- Static current: 3uA – 5uA
- Dynamic current: 3mA – 5mA
₹90₹105In stock
-
3.3V Adapter Board For 24L01 Wireless Module
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Small power on SMD LED indicator
- On-Board Voltage Regulator
₹50₹70In stock
-
ESP-01 ESP8266 Serial WIFI Transceiver Module
- 11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
₹120₹170In stock
-
Ai Thinker LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
- Communication distance: 15KM
- Sensitivity: down to -148dBm
- Programmable bit rates: up to 300kbps
- RSSI dynamic range: 127dB
₹430₹490In stock
-
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
₹180₹450In stock
