All Categories
-
MECO 135B+ TRMS Digital Multimeter
- DC Voltage 9.999 / 99.99 / 999.9mV / 9.999 / 99.99 / 999.9V
- AC Voltage 9.999 / 99.99 / 999.9mV / 9.999 / 99.99 / 750.0V
- AC Response 40Hz ~ 1KHz
- DC Current 99.99 / 999.9 A 999.9mA / 9.999A
- AC Current 99.99 / 999.9 A 999.9mA / 9.999A
- AC Response 40Hz ~ 1KHz
- Resistance 99.99 / 999.9 / 9.999 / 99.99 / 999.9K / 9.999 / 99.99MΩ
- Capacitance 9.999 / 99.99 / 999.9nF / 9.999 / 99.99 / 999.9µF / 9.999mF
- Frequency 99.99Hz ~ 9.999MHz
- Duty Cycle 1% ~ 99%
- Temperature -20°C ~ 1000°C / -4°F ~ 1832°F
- Measuring Category CAT II 1000V, CAT III 600V
- SP Function Diode test, Audible Continuity, Data Hold
- Dimensions 130 x 65 x 32mm (approx.)
₹2,988₹3,840In stock
-
MECO 1080+TRMS Digital AC/DC Clamp Meter
- Display 3⅚ Digits LCD Display
- Display Counts 6000
- Jaw Opening Size 30 mm
- DC Current Range 600 µA-1200 A
- DC Voltage Range 600 mV-1000 V
- AC Current Range 600 µA-1200 A
- AC Voltage Range 600 mV-750 V
- Capacitance Range 9.99 nF-9.99 mF
- Frequency 99.99 Hz-20 MHz
- Temperature Range -20° to 1000°C
- Dimensions 238x90x48 mm
₹4,980₹5,880Only 2 left in stock
-
MECO 72T- Auto Digital AC Clamp Meter
- AC Current: 40A, 400A (Auto Ranging)
- Overload: 400A AC max. for 1 min.
- AC Voltage: 4V, 40V,400V, 600V (Auto Ranging)
- DC Voltage: 400mV, 4V, 40V, 400V, 600V (Auto Ranging)
- Temperature: -200C to 7500C
- Frequency: 10Hz, 100Hz, 1000Hz, 10KHz, 100KHz, 1000KHz, 10MHz (Auto Ranging)
- Resistance: 400Ω, 4kΩ, 40KΩ,400kΩ, 4MΩ, 40MΩ (Auto Ranging)
- Low Battery Indicated: Yes
- Safety Standard: CAT II 600V
- Dimension: 185 x 65 x 28 mm
₹1,980₹2,670Out of stock
-
MECO 36-Auto BL Digital AC/DC Clamp Meter
- Display 3 Digits LCD Display
- Display Counts 4000
- Jaw Opening Size 25 mm
- DC Current Range 0-600 A
- DC Voltage Range 400 mV-600 V
- AC Current Range 0-600 A
- AC Voltage Range 0-600 V
- Capacitance Range 40 nF-200 F
- Frequency 10 Hz-10 MHz
- Temperature Range -20 to 750C
- Power 2 AAA Batteries 1.5 V
- Dimensions 185x65x28 mm
₹3,510₹4,620Only 1 left in stock
-
MECO 27T- Auto BL Digital AC Clamp Meter
- Display 3-1/2Digits LCD Display
- Display Counts 2000
- Jaw Opening Size 25 mm
- DC Voltage Range 200 mV-600 V
- AC Current Range 0-400 A
- AC Voltage Range 0-600 V
- Temperature Range -20 to 750C
- Power 2 AAA Batteries 1.5 V
- DC Voltage Range 0-600 V
- AC Current Range 0-400 A
- AC Voltage Range 0-600 V
- Resistance Range (Ohm) 0-20 M
- Dimensions 185x65x28 mm
₹1,550₹2,150Out of stock
-
MECO 27-Auto BL Digital AC Clamp Meter
- Display 3 Digits LCD Display
- Jaw Opening Size 25 mm
- DC Voltage Range 200 mV-600 V
- AC Current Range 0-400 A
- AC Voltage Range 0-600 V
- Power 2 AAA Batteries 1.5 V
- DC Voltage Range 0-600 V
- AC Current Range 0-400 A
- AC Voltage Range 0-600 V
- Resistance Range (Ohm) 0-20 M
- Dimensions 185x65x28 mm
₹1,410₹1,950Out of stock
-
Metasol 50W 230V High Quality Soldering Iron
- Brand: Metasol
- Max Temperature: 460c
- Auto Temperature Control: No
- Operating Voltage: 150~230V
- Rated Power: 50W
- Plug Type: Round Indian
- Weight (gm): 140
₹380₹427In stock
-
Metasol 35W 230V High Quality Soldering Iron
- Brand: Metasol
- Max Temperature(°C): 480
- Operating Voltage (VDC): 230 VAC
- Power Rating: 35W
- Color: Orange
- Weight (gm): 135
- Cable Length: 1.5 Meter
₹340₹395In stock
-
Metasol 25W 230V High Quality Soldering Iron
- Brand: Metasol
- Max Temperature(°C): 380
- Operating Voltage (VDC): 230 VAC
- Power Rating: 25W
- Color: Yellow
- Weight (gm): 120
₹260₹337In stock
-
INGCO Digital Non-Contact Voltage Test Pencil – HDST2201
- Test Voltage: AC100-500V /Digital:12-220V
- Size:135mm 23mm
- No need to install battery
- Packed by double blister
₹200₹299In stock
-
INGCO 12V Lithium-ion Impact Drill – CIDLI12328
- Product Type: Impact Drill
- Model No.: CIDLI12328
- Voltage: 12 V
- No-Load Speed: 400/0-1500 rpm
- Max Impact Rate: 22500 bpm
- Max Torque: 20 Nm
- Chuck Capacity: 0.8-10 mm
- Torque Settings: 18+1+1
- Battery Charging Port: USB Type-C
- Weight: 2 kg (Approx)
₹3,990₹5,500Out of stock
-
INGCO 4 V Lithium-Ion Cordless Screwdriver with 38 pcs Tools Set – HKTHP10381
- Voltage:4V
- Hex Shank:1/4″
- No-load speed:180rpm
- Max torque:4N.m
₹2,350₹3,270Out of stock
-
INGCO 12V Lithium-Ion Cordless Drill 750 RPM – CDLI12422
- Product Type: cordless drill
- Model No.: CDLI12422
- Voltage: 12V
- No-load speed: 0-750rpm
- Max torque: 20 NM
- Chuck capacity: 0.8-10 mm
- Torque settings: 15+1
₹1,750₹2,752Only 1 left in stock
-
INGCO 8V Lithium-Ion Cordless Screwdriver – CSDLI0802
- Product Type: Cordless Screwdriver
- Model No.: CSDLI0802
- Brand: INGCO
- Voltage: 8V
- Hex Shank: 1/4 Inch
- Load Speed: 220 RPM
- Torque: 6 Nm
- Torque Settings: 15+1
- Reverse Rotation: Yes
- Weight: 1 kg (Approx.)
₹2,070₹3,536Out of stock
-
INGCO Electric Paint Spray Gun – SPG3508
- Voltage:220-240V~50/60Hz = Input power:450W
- Spraying Pressure:0.1-0.2Bar – Spraying Pressure:0.1-0.2Bar
- Max flow:380ml/min & Max. viscosity:50DIN-s
- Container capacity:800ml
₹1,850₹3,150Out of stock
-
Wadfow Li-Ion Cordless Screwdriver 4V – WCV4404
- Voltage:4V
- Hex Shank:1/4″
- No-load speed:180/min
- torque:4NM
- Integrated work light
- Charge level indicator
₹1,199In stock
-
L293D Motor Driver/Servo Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- Pull down resistors keep motors disabled during power-up
- Arduino reset button brought up top
₹140₹250In stock
-
BTS7960 43A H-Bridge High Power Stepper Motor Driver Module
- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
₹280₹550In stock
-
A4988 Stepper Motor Driver Module
- Supply Voltage: 8-35 VDC.
- Current: 1.0A (no heatsink)
- Current: 2.0A (with heat-sinking)
- logic input: 3 – 5.5V
₹80₹110In stock
-
L298N 2A Dual Motor Driver Module With PWM Control
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip: L298N.
- Operating Voltage (VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- of Channels: 2
₹130₹180In stock
-
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
₹550₹620In stock
-
USB to RS485 Converter Adapter
- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Supports Plug, Play and hot-swap (USB side)
- Better than using CH341D chip or similar chip to support the laptop USB port.
- Communication distance up to 1.2KM
₹120₹150In stock
-
PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin
- Fully Compliant with USB Specification v2.0 (Full-Speed)
- Supports RS-232 serial interface
- On chip USB 1.1 transceiver, 5V to 3.3V regulator
- Two data transmission LEDs that indicate data transfer status in real time
- Has a 500mA self-recovery fuse for safety
₹85₹120In stock
-
5V 4 Channel Relay Module with Optocoupler
- of Channel: 4
- Trigger Level: LOW
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
₹140₹200In stock
-
5V 2 Channel Relay Module with Optocoupler
- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage (3.3V – 5V)
₹85₹120In stock
-
5V 1 Channel Relay Module
- Trigger Voltage: 5 VDC
- Trigger Level: LOW
- Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
- Single Pole Double Throw (SPDT) Configuration
- Power supply indicator LED
₹40₹70In stock
-
Official Micro HDMI to Standard HDMI Cable for Raspberry Pi
- 1 Meter heavy quality cable
- Moulded strain-relief design lessens plug/socket pressure.
- Designed to meet all HDMI standards.
- Supports high resolution HDMI plug to HDMI plug leads
- Compatible with Raspberry Pi 4 Model B and all previous Raspberry Pi models
₹490₹550In stock
-
Official Raspberry Pi 4 Case-Red-White
- Easy two-piece installation design
- Rubber pad grip at the bottom
- Raspberry LOGO on Top
₹370₹390In stock
-
Official Raspberry Pi 4 Power Supply USB type-C 15.3W
- Good Quality material
- 96-230Vac operating input range
- Input Current: 0.5A maximum
- Input Power consumption (no load): 0.075W maximum
- USB-C connection goes straight into your Raspberry Pi
₹750₹870In stock
-
Micro HDMI Male to HDMI Female Adapter for Raspberry Pi
- Micro HDMI Male to HDMI Female
- Gold plated connectors for flawless signal transference
- CE and ROHS Compliant
- For the Raspberry Pi
₹60₹80In stock
-
WeMos D1 R2 WiFi ESP8266 Development Board
- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
- Based on the ESP-8266EX.
- Arduino Compatible, you can use it on Arduino IDE.
- NodeMcu Compatible
₹350₹380In stock
-
Wemos D1 Mini ESP8266 NodeMcu Lua WIFI IOT Development Board
- Driver IC: CH340
- 11 digital input/output pins
- 1 analog input (3.2V max input)
- Micro USB connection
- Use BRT (Bias Resistor Transistor), easier into flash mode.
- Compatible with Arduino
- Compatible with NodeMCU
- Compatible with MicroPython
₹165₹27039% offIn stock
-
NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board
- Uses CH340G instead of CP2102.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support UART / GPIO data communication interface
- A great set of tools to develop ESP8266
- Lowest cost WI-FI
- FOR Arduino like hardware IO
₹180₹30040% offIn stock
-
USB To UART/ESP8266 Adapter Programmer For ESP-01 WiFi Modules With CH340G Chip
- Driver Chip: CH340G
- Supports all basic windows versions.
- Working voltage: 4.5V – 5.5V
- Working current: 300mA
₹100₹120In stock
-
MT76813DBI ESP8266 Serial WIFI Wireless Gain Antenna
- Radome material: polyurethane
- Flexible cable
- Stable signal
- Best for indoor applications.
₹70₹80In stock
-
Micro SD Card Reader Module
- Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board
- Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
₹40₹80In stock
-
FS1000A 433mHz Transmitter Receiver RF Radio Module
- Wide input supply (2.5 V to 12V)
- Easy to integrate (V+, GND, and Data)
- The device in deep sleep mode when Data pin is grounded
- Very small dimension.
₹100₹120In stock
-
Infrared IR Wireless Remote Control Module Kit
- Battery: CR2025 160mAh button battery
- Effective angle: 60°
- Sticking material: 0.125mmPET
- Static current: 3uA – 5uA
- Dynamic current: 3mA – 5mA
₹90₹105In stock
-
3.3V Adapter Board For 24L01 Wireless Module
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Small power on SMD LED indicator
- On-Board Voltage Regulator
₹50₹70In stock
-
ESP-01 ESP8266 Serial WIFI Transceiver Module
- 11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
₹120₹170In stock
-
Ai Thinker LoRa Ra-02 SX1278 433MHz Wireless Spread Spectrum Transmission Module
- Communication distance: 15KM
- Sensitivity: down to -148dBm
- Programmable bit rates: up to 300kbps
- RSSI dynamic range: 127dB
₹430₹490In stock
-
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
₹180₹450In stock
-
Raspberry Pi Pico W – Original
- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB B port for power and data (and for reprogramming the flash)
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
- 23 GPIO are digital-only, with three also being ADC capable
₹610₹700In stock
-
Raspberry Pi Pico – Original
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
₹380₹400In stock
-
Raspberry Pi 5 Model-B with 8GB RAM
- 4GHz quad-core, 64-bit Arm Cortex-A76 CPU, with 512KB L2 caches and a 2MB shared L3 cache
- VideoCore VII GPU
- LPDDR4X-4267 8GB SDRAM
- 4 GHz and 5.0 GHz 802.11ac Wi-Fi
- Bluetooth 5.0 / Bluetooth Low Energy (BLE)
- Micro SD card slot, with support for high-speed SDR104 mode
- 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
- 2 × USB 2.0 ports
- Gigabit Ethernet, with PoE+ support (requires PoE+ HAT)
- 2 × 4 lane MIPI camera/display transceivers
- PCIe 2.0 x1 interface for fast peripherals
- 5V/5A DC power (PD enabled)
- Raspberry Pi standard 40-pin header
₹8,790₹9,000Out of stock
-
Raspberry Pi 5 Model-B with 4GB RAM
- 4GHz quad-core, 64-bit Arm Cortex-A76 CPU, with 512KB L2 caches and a 2MB shared L3 cache
- VideoCore VII GPU
- LPDDR4X-4267 4GB SDRAM
- 4 GHz and 5.0 GHz 802.11ac Wi-Fi
- Bluetooth 5.0 / Bluetooth Low Energy (BLE)
- Micro SD card slot, with support for high-speed SDR104 mode
- 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
- 2 × USB 2.0 ports
- Gigabit Ethernet, with PoE+ support (requires PoE+ HAT)
- 2 × 4 lane MIPI camera/display transceivers
- PCIe 2.0 x1 interface for fast peripherals
- 5V/5A DC power (PD enabled)
- Raspberry Pi standard 40-pin header
₹5,950₹6,300Only 1 left in stock
-
Raspberry Pi 4 Model-B with 8GB RAM
- VideoCore VI graphics
- 5 GHz quad-core Arm® Cortex®-A72 CPU
- 4kp60 HEVC decode
- True Gigabit Ethernet
- 2 × USB 3.0 and 2 × USB 2.0 ports
- 2 × micro-HDMI ports (1 × 4kp60 or 2 × 4kp30)
- USB-C™ for input power, supporting 5 V / 3 A operation
₹8,490₹9,000Out of stock
-
Raspberry Pi 4 Model-B with 4GB RAM
- 5 GHz quad-core Arm® Cortex®-A72 CPU
- VideoCore VI graphics
- 4kp60 HEVC decode
- True Gigabit Ethernet
- 2 × USB 3.0 and 2 × USB 2.0 ports
- 2 × micro-HDMI ports (1 × 4kp60 or 2 × 4kp30)
- USB-C™ for input power, supporting 5 V / 3 A operation
₹5,850₹6,200In stock
-
SanDisk 64GB Micro SD Card – Class10
- Memory Size: 64 Gigabyte
- Card Type: Micro SD
- Speed: up to 98MB/s
- Class: 10
- High-speed Card
₹550₹850In stock
-
SanDisk 128GB Micro SD Card – Class10
- Memory Size: 128 Gigabyte
- Card Type: Micro SD
- Speed: Up to 120MB/s transfer speed
- Class: 10
- High-speed Card
₹1,100₹1,560In stock
