-
Metasol 50W 230V High Quality Soldering Iron
- Brand: Metasol
- Max Temperature: 460c
- Auto Temperature Control: No
- Operating Voltage: 150~230V
- Rated Power: 50W
- Plug Type: Round Indian
- Weight (gm): 140
₹380.00 (Incl GST)In stock
-
Metasol 35W 230V High Quality Soldering Iron
- Brand: Metasol
- Max Temperature(°C): 480
- Operating Voltage (VDC): 230 VAC
- Power Rating: 35W
- Color: Orange
- Weight (gm): 135
- Cable Length: 1.5 Meter
₹340.00 (Incl GST)In stock
-
Metasol 25W 230V High Quality Soldering Iron
- Brand: Metasol
- Max Temperature(°C): 380
- Operating Voltage (VDC): 230 VAC
- Power Rating: 25W
- Color: Yellow
- Weight (gm): 120
₹260.00 (Incl GST)In stock
-
Wadfow Li-Ion Cordless Screwdriver 4V – WCV4404
- Voltage:4V
- Hex Shank:1/4″
- No-load speed:180/min
- torque:4NM
- Integrated work light
- Charge level indicator
₹1,199.00 (Incl GST)In stock
-
L293D Motor Driver/Servo Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- Pull down resistors keep motors disabled during power-up
- Arduino reset button brought up top
₹135.00 (Incl GST)In stock
-
BTS7960 43A H-Bridge High Power Stepper Motor Driver Module
- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
₹390.00 (Incl GST)In stock
-
A4988 Stepper Motor Driver Module
- Supply Voltage: 8-35 VDC.
- Current: 1.0A (no heatsink)
- Current: 2.0A (with heat-sinking)
- logic input: 3 – 5.5V
₹78.00 (Incl GST)In stock
-
L298N 2A Dual Motor Driver Module With PWM Control
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip: L298N.
- Operating Voltage (VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- of Channels: 2
₹135.00 (Incl GST)In stock
-
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
₹550.00 (Incl GST)In stock
-
USB to RS485 Converter Adapter
- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Supports Plug, Play and hot-swap (USB side)
- Better than using CH341D chip or similar chip to support the laptop USB port.
- Communication distance up to 1.2KM
₹99.00 (Incl GST)In stock
-
PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin
- Fully Compliant with USB Specification v2.0 (Full-Speed)
- Supports RS-232 serial interface
- On chip USB 1.1 transceiver, 5V to 3.3V regulator
- Two data transmission LEDs that indicate data transfer status in real time
- Has a 500mA self-recovery fuse for safety
₹79.00 (Incl GST)In stock
-
5V 4 Channel Relay Module with Optocoupler
- of Channel: 4
- Trigger Level: LOW
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
₹138.00 (Incl GST)In stock